Tag: gelatin prints

Mixed Media Journal: The Beginning

As I mentioned in my last post, I started a mixed media journal last month. I thought short videos would be a cool way to watch the pages come together. Here is the first layout I made, hope you enjoy it!

The supplies I used for these pages were, acrylic paint, Derwent’s inktense pencils, a gelatin print of my hand, masking tape, washi tape, and Decou-Page decoupage medium. If you enjoy this series be sure to like this post!

Color Gelatin Prints

Gelatin Print Wood Grain

Mono printing with a gelatin plate, is probably my favorite way to make art. Unlike other forms of printing, or even drawing or painting there is very little pre-planning. All the creativity happens with the ink and materials right on the gelatin block. Often pages you press onto the plate as throwaways, just to absorb excess ink, turn out to be the best print of the day. If you haven’t tried this art form yet read my tutorial and experiment!

Gelatin Print Leaves Gelatin Print Leaves

Read more

Refresh Old Art Prints in New Frames

Everyone have a good Thanksgiving/Black Friday? It’s hard to say which of those are more American. I had a great both, the only stores I went to however were… you guessed it thrift! I got this sweet wicker/bamboo/wood chest:

Mini Wicker Chest

I got it for storage, since we still have zero in the still being renovated bathroom. However it looks awful in there sooooo, stay tuned for that. I think i’m going to bust the bottom trim off it. I hate feminine scroll trim.

Read more

Gelatin Print Tutorial, and Giveaway Results!

Thanks to everyone who entered my giveaway contest, and congratulations to Terri at Time to Be Inspired (check out her blog!), the winner of the prints! I really enjoyed making them, and all the other gelatin prints I have been making lately. It’s super easy to do, and would be a great activity to do with kids. Here are some of my finished prints:

 

Here is what you’ll need to make your own:

  • Unflavored gelatin (I used 2 boxes or 8 packets of Knox brand)
  • A dish, pan or cookie sheet to form the gelatin plate in (I used the bottom of a broiler pan)
  • Printing ink (I used Speedball Block Printing Ink in Black from Hobby Lobby)
  • A brayer to spread the ink on the plate (like this one)
  • Something you want to make prints of: leaves, feathers, stencils, etc.
  • Paper, heavier paper like card-stock works well, but you can get cool effects with others like, old dictionary pages, sheet music, handmade paper etc.

To make the gelatin plate, boil 2 cups of water. While it’s boiling, dissolve the packets of gelatin into 2 cups of cool water. Combine the two cups of boiled water with the dissolved gelatin mixture. Pour the mix into your plate form, skim the top for bubbles so the surface is perfectly level. Place in the fridge, the plate should be plenty hard in a few hours, but I like to keep it in the fridge overnight. Here is my ready to use plate:

 

I didn’t have anything specific I was trying to make the first time I tried this so I had tons of stuff I wanted to try to make prints of, and tons of different types of paper. Here is my collection of stuff to try out:

To begin making prints, pour out some ink onto a paper plate or palette or whatever you got. Spread some onto the brayer and apply to the gelatin plate.

 

For each run, you will be making two prints. So once the plate is covered evenly in ink, arrange whatever you want to print on the plate. For this run I placed three lace appliqué pieces that were left over from my wedding dress on the plate:

Place a piece of paper over the plate and rub the ink on the paper, be careful not to shift the paper around to much. As you can see in the picture below I was using scrap paper.

Here is that piece of paper pulled up, this is called the negative image.

To get a positive image, pull up the material on the plate carefully. On the right is a picture of the ink that was left on the plate when the lace appliqué was removed.

 

Using another piece of paper to pick up the leftover ink, this time a sheet of recycled card-stock, I got this image:

Here is a close up:

After a couple of hours of using the gelatin plate it might get a bit mushy, just stick it back in the fridge to firm up again. Over time you might nick the plate or imprint shapes on it, this can result in interestingly altered prints. If you want to change ink colors or otherwise want to clean the plate just wipe it off with clean water, dry it throughly before starting to print again.

Most of my finished prints ended up drying curled up:

To get them to lay flat, I covered a few at a time with a piece of scrap muslin, and ran my iron over them without steam. Then when they were still warm and flexible I bent them back into shape by hand and then stacked them under heavy books.

I find it hard to compose fully formed artwork with the gelatin plate, I like to create different images with the gelatin block and then cut and cobble together pieces into finished pieces of art. Here are shots of me cutting up the lace prints and rearranging them for the giveaway:

              

On your first attempt it’s best not to try to make anything specific, just play around with objects, paper, inks, negative and positive image and so on. Once your have tons of dried prints, and a better understanding of what works and what doesn’t write down different combinations or layouts you want to try for next time.

For more tips and ideas on gelatin printing check out Printmaking Without a Press’s page on Gelatin Printing Tips she also lots of cool ideas elsewhere on her site. Good luck with your own print making, and congrats again to Terri on winning Zounds’ first of hopefully many giveaways.

UPDATE 1/29/2015: I got a request for a printable version of these instructions, download the pdf here: Gelatin Print Tutorial.

UPDATE: I am now selling my gelatin prints in the Zounds Store!


100th Post and First Ever Giveaway!

Its been awhile since my last post! My goal was to post again last Friday. However, I was “lucky” enough to be picked for jury duty, get put on a trial, and have that trial run for 2 days more than expected…. but I am back now.

As I mentioned previously I wanted to take a break from posting, because I felt that Zounds had gotten stale, and I was having trouble keeping up with it. I seriously considered not coming back, but I think I just needed a little break to remember that this blog is a fun thing not a chore. I have also been working on some format changes. I’m still not quite done, and will be changing things on my homepage still. However, I am moving back to posting regularly and can’t wait to show you all the awesome things I have been working on!

As I also previously mentioned in my last message a couple of weeks ago, I wanted to do something special for my 100th post. So I am doing my first ever giveaway! I am a little nervous, this is still a very small blog, hopefully people enter! Over my little break I’ve been playing around with gelatin printing. I made tons of prints and I really liked the way the lace themed ones turned out… so for Zounds first ever giveaway I will be awarding the lovely prints below to one lucky reader.

The Giveaway: The 3 prints shown above. All are 5×7 gelatin ink prints, handmade by me. The prints are pictured below in frames, the frames are NOT included in the giveaway.

The Contest: Will be open upon the publishing of this post and close at midnight (12 am) on Sunday the 8th of July.

To Enter: Add a comment to this post, telling me where/how you would display the prints. Only one entry per person, and my family members can’t win. Duplicate entries will be discarded.

The Winner: Will be chosen randomly, and notified by email on Monday the 9th of July. The winner has 1 week to reply, if the prints aren’t claimed by that time, a new winner will be selected.

I will also be posting the winner of the giveaway on Monday the 9th of July on this blog, along with a tutorial on how to make your own gelatin ink prints. Good luck, and thanks for reading Zounds!